Painted Speaker Cover
Painting parts of the electronic systems, in home and office environments, present special challenges to the interior painting craftsman. In the past week, I had the pleasure of meeting John Baumeister of Tech Tonic at a networking function. As a technology consultant to owners of buildings, John takes his work very seriously. At some point in the conversation, John voiced that one of his pet peeves has to do with mistakes painters often make when painting speaker covers. He queried me regarding the methodology our painters follow when painting speaker covers. I thought I would pass along the information I shared with John.
Our painting experience has been gained over more than twenty years of operation as painting contractors in the Chicago area. First of all, I recommend that the speakers be installed where they belong, prior to any painting, so as to prevent unavoidable touchups. When it is a new installation, we also recommend that the installer leaves off the speaker covers and instead uses the plastic covers supplied by the manufacturer, in order to prevent damage or dust contamination by other trades. For new installations, we also recommend that the installer tags the speaker covers to identify the room and surface they will be mounted on. The installer should also request a signature from the painting contractor (or the owner) when he/she takes possession of the covers. That form should list the covers, quantities and nature of the covers. The use of such a form will limit the opportunity for loss or miscommunication.
Spray Tool for Painting Speaker Covers
What about the painting? Covers will sometime have a liner acoustical fabric on their backside. That fabric should be removed and protected for reinstallation after the painting is completed. The most affective way we have found to paint speaker covers is a simple hand-held spray system called Spra-Tool. It comes with a propellant cartridge, a plastic jar to hold the paint and a connection to bring the propellant to the jar. The paint may have to be thinned ten percent and three thin coats may be required to avoid clogging holes. For darker colors, we recommend to first prime the covers with a bonding primer to ensure good paint adhesion. After the paint has cured, the plastic cover is removed and the custom-painted covers can be installed, for a factory-painted look!
Follow
